|
"For vibration and noise
isolation between the piping and
the vibration equipment
"
The manufacturing facility for
hoses and braids has led to further value addition in the form of
Pump Connectors.
Pump Connectors are normally
provided for vibration and noise isolation between the piping and
the vibration equipment.
A standard Pump Connector consists
of a convoluted stainless steel hose with an over braid with a
fitting at either end. The fitting being either a flange type,
threaded type or hexagonal nipple type.
Pump Connectors of longer lengths
to accommodate additional lateral deflection and excessive vibration
are also made to meet specific customer needs.
Product Specification
BRAIDED-TYPE PUMP CONNECTORS
|
Item |
Hose ID |
Overall |
Working |
Test |
Burst |
|
Inches |
Length |
Pressure |
Pressure |
Pressure |
|
|
Inches |
Kg/Cm2 |
Kg/Cm2 |
Kg/Cm2 |
|
Threaded Ends |
|
PT 1/2 |
1 /2" |
6.5 |
80 |
120 |
320 |
|
PT 3/4 |
3/4" |
7 |
64 |
96 |
256 |
|
PT 1 |
1 " |
8 |
50 |
75 |
200 |
|
PT 1¼ |
1 ¼ |
8.5 |
40 |
60 |
160 |
|
PT 1½ |
1 ½ |
9 |
30 |
45 |
120 |
|
PT 2 |
2" |
10.5 |
28 |
42 |
112 |
|
PT 2½ |
2 ½ |
12 |
24 |
36 |
96 |
|
PT 3 |
3" |
14 |
18 |
2 7 |
72 |
|
PT 4 |
4" |
16 |
16 |
24 |
64 |
|
Flanged Ends |
|
PF 2 |
2" |
9 |
28 |
42 |
112 |
|
PF 2½ |
2½ |
9 |
24 |
36 |
96 |
|
PF 3 |
3" |
9 |
18 |
27 |
72 |
|
PF 4 |
4" |
9 |
16 |
24 |
64 |
|
PF 5 |
5" |
9 |
12 |
18 |
48 |
|
PF 6 |
6" |
9 |
10 |
15 |
40 |
|
Note:
-
All threaded assembles
have male NPT ends, schedule 40 carbon steel, with stainless
steel hose and stainless steel single braid covering.
-
All flanged assemblies
have 150 Lbs carbon steel flanges with stainless steel hose and
stainless steel single braid covering.
-
Pump Connectors with
hexagonal nipple in carbon steel can also be manufactured at
customer's request.
The above information is subject to change without
notice due to continuous development and research.
Top
|
